measurementlab/jostler Docker 镜像 - 轩辕镜像

![Coverage Status]([***]

Jostler Design

1. Background

jostler is the uploader agent of the Autoloading project. Please see the design doc Autoloading Measurement Results into BigQuery for details.

2.jostler operation

jostler will support two modes of operation:

1. A short-lived interactive local mode to create a BigQuery table schema file for a given datatype. The table schema file is built using the standard columns and the datatype schema. This mode is mainly meant for an operator to examine and verify the table schema before creating a table.
2. A long-lived non-interactive daemon mode to serve as an upload agent on M-Lab's nodes.

In the long-lived non-interactive mode, jostler will run as a sidecar container of the new measurement container. The new measurements will write new format files in JSON format to a predefined location on the local filesystem as described earlier and jostler will use inotify to monitor filesystem events in the predefined location. jostler will read individual new format files, bundle them together, compress the bundle, and upload the bundle to GCS. After a successful upload, jostler will delete from the local filesystem new format and other files that the new measurement generated.

Any files that were not included in a bundle due to any error such as wrong extension (not .json), read error, or invalid JSON will also be deleted from the local filesystem in order to avoid filling up the node's disk space.

There are two configurable parameters that control triggering of an upload operation:

1. Bundle size (e.g., 30 megabytes)
2. Bundle age (e.g., 3 hours)

Once a bundle reaches its maximum allowable size or age, it will be uploaded to GCS.

2.1. Bundle names

The location of new format files is predefined in the new measurement container as follows:

    /var/spool/<experiment>/<datatype>/<yyyy>/<mm>/<dd>/<new-format-data>

The reason new format pathnames must follow the above convention is that upload agents, pusher and jostler, use the same string of the pathname after /var/spool as a prefix for GCS object names. For details, see [Uniform Names: Experiments by Any Other Name [Would Not Be As Sweet]]([***]

For example, pusher creates object names prefixed by ndt/scamper1/2022/09/12

in the pusher-mlab-oti bucket for traceroute data (scamper1 datatype) generated as a sidecar service of NDT measurements on 2022/09/12 as we can see below:

    $ gsutil ls gs://pusher-mlab-oti/ndt/scamper1/2022/09/12
    gs://pusher-mlab-oti/ndt/scamper1/2022/09/12/20220912T***.409697Z-scamper1-mlab2-gru01-ndt.tgz
    gs://pusher-mlab-oti/ndt/scamper1/2022/09/12/20220912T***.800575Z-scamper1-mlab3-gig03-ndt.tgz
    ...

jostler will upload JSONL bundles to a GCS bucket specified by a flag which can be the same as the current pusher's buckets pusher-mlab-{sandbox,staging,oti}. And because jostler's GCS object names have the autoload/<version> prefix before <experiment>/<datatype>/... they will be easily distinguished from pusher's objects:

    autoload/<version>/<experiment>/<datatype>/<yyyy>/<mm>/<dd>

The purpose of autoload/<version> in the prefix of the object name is to support breaking changes to autoloading implementation.

Each data bundle will have the following naming convention:

    prefix=autoload/<version>/<experiment>/<datatype>/<yyyy>/<mm>/<dd>
    <prefix>/<timestamp>-<datatype>-<node>-<experiment>-data.jsonl.gz

2.2. Bundle contents

2.2.1. Standard columns

Each bundle will consist of individual JSON objects (new format files), one per line, and each line will include a subset of standard columns in the first version (v1) of autoloading. With respect to the standard columns, it's important to highlight the following:

• Since the main objective of autoloading is to avoid parsing, there will be no parser record. Instead, there will be an archiver record that jostler will add by wrapping raw JSON from new format files within an outer record. In this way jostler would make it easier for the new measurement to satisfy the standard columns requirement. But third-parties that don't use jostler would still be better if they included fields like date (and others in time when we specify more).
• It will be helpful to have an id field. In fact, this will be a requirement in the future if we ever want to join autoloaded data with, say, the annotation data. However, since this requires more semantic awareness of the raw JSON and some way of specifying the format of the id, it is not a requirement for autoloading v1. Aside from autoloaded data, we should keep this in mind with the possible future goal of migrating existing JSON parser datatypes to be autoloaded. The id field could be the filename minus any filename extension to encourage services to name files with the UUID or similarly meaningful unique identifier. This would preserve semantic opaqueness of the raw data while providing a convention to populate the id field.

Version 1 of a JSONL bundle will look like the following, pretty printed, abbreviated, and showing standard column names in boldface:

    {
      "**date**": "2022/09/29",
      "**archiver**": {
        "Version": "jostler@0.1.7",
        "GitCommit": "3ac4528",
        "ArchiveURL": "gs://<bucket>/<prefix>/<bundlename>.jsonl.gz",
        "Filename": "<yyyy>/<mm>/<dd>/<filename1>.json"
      },
      "**raw**": {
        "UUID": "1234",
        "MeasurementVersion": "0.1.2",
        "Field1": 42
      }
    }
    {
      "**date**": "2022/09/29",
      "**archiver**": {
        "Version": "jostler@0.1.7",
        "GitCommit": "3ac4528",
        "ArchiveURL": "gs://<bucket>/<prefix>/<bundlename>.jsonl.gz",
        "Filename": "<yyyy>/<mm>/<dd>/<filename2>.json"
      },
      "**raw**": {
        "UUID": "1234",
        "MeasurementVersion": "0.1.2",
        "Field1": 420
        "Field2": 31.41
      }
    }
    ...

• date is the date component of the directory pathname where new format files were discovered. For example, the date field of the bundle that contains new format files in /var/spool/ndt/foo1/2022/09/29 will be 2022/09/29.

• archiver defines the details of the running instance of jostler.

• raw contains individual new format contents in JSON format without any modification. The fields UUID, MeasurementVersion, Field1, and Field2 are simply examples. The new measurement provider will decide what fields will be included in their new format.

Notice that not all data fields are necessarily included in each raw JSON object (new format files). The above example shows that Field2 and Field1 are missing from the first and the second new format files respectively.

2.3. Datatype schema

New measurements should provide the schema of their measurement data as a file in JSON format.

When jostler starts, it looks for datatype schema files of each specified datatype, generates the corresponding BigQuery table schema (which includes M-Lab's standard columns), and uploads the table schema files to GCS. The location of a datatype schema file can be specified via a command line flag (-datatype-schema-file) but its default location is:

    /var/spool/datatypes/<datatype>.json

In the interactive mode, the operator can use the -schema flag to create the schema and examine it. For example, below is the command to create BigQuery table schemas for tables foo1 and bar1. In this example, jostler is told to look for foo1's measurement data schema in the default location and for bar1's in /path/to/bar1.json.

    $ ./jostler -schema -datatype foo1 -datatype bar1 \
        -datatype-file bar1:/path/to/bar1.json

jostler uploads table schema files to GCS as the following objects:

    autoload/v1/tables/<experiment>/foo1-table.json
    autoload/v1/tables/<experiment>/bar1-table.json

The purpose of version v1 is to support breaking changes to autoloading implementation (i.e., conventions agreed on between jostler and the loader agent in the pipeline).

2.4. Index bundles

For every JSONL bundle that jostler uploads to GCS, it will also upload an index file also in JSONL format that contains the list of filenames contained in the bundle in the same order that new format data appears in the raw fields of the bundle.

jostler creates index files as a special datatype of index1 so the autoload agent in the pipeline does not have to distinguish between measurement data files and index files. In other words, as far as the pipeline is concerned, index1 is just another datatype.

Index bundles will have the same name as the bundle they describe.

2.5. Default paths and object names

In summary, by default:

1. Measurement data files will be read from the local filesystem at:

   /var/spool/<experiment>/<datatype>/<yyyy>/<mm>/<dd>
   

2. Datatype schema files will be read from the local filesystem at:

   /var/spool/datatypes/<datatype>.json
   

3. Table schema files will be uploaded to GCS as:

   autoload/v1/tables/<experiment>/<datatype>.table.json
   

4. JSONL data bundles will be uploaded to GCS as:

   autoload/v1/<experiment>/<datatype>/<yyyy>/<mm>/<dd>/<timestamp>-<datatype>-<node>-<experiment>-data.jsonl.gz
   

5. JSONL index bundles will be uploaded to GCS as:

   autoload/v1/<experiment>/<datatype>/<yyyy>/<mm>/<dd>/<timestamp>-<datatype>-<node>-<experiment>-index1.jsonl.gz
   

2.6. jostler configuration

GCS configuration

• bucket name: for example pusher-mlab-{sandbox,staging,oti}
• home folder: object name starts with this string (e.g., autoload/v1)
• M-Lab node name: parsed and used in object names (examples in

Bundle configuration

• maximum size: maximum size before it is uploaded
• maximum age: maximum duration since a bundle was created in memory until it is uploaded

Filesystem configuration

• home directory: directory under which measurement data is created (e.g., /var/spool)
• extensions: filename extensions of interest (default .json); other files will be ignored
• experiment: name of the measurement service (e.g., ndt)
• datatypes: name(s) of the datatype(s) the experiment generates (e.g., scamper1)
• minimum file age: minimum duration since a file's last modification time before it is ***ed a missed data file
• scan interval: the interval for scanning filesystem for missed files

Execution

• flush timeout: maximum duration for flushing active bundles to GCS before exiting
• schema: run in the interactive mode and create schema files
• verbose: enable verbose mode for more logging

2.7. jostler architecture

jostler architecture consists of a public api package that defines standard columns and index1 datatype, and the following internal packages:

• internal/gcs: handles downloading and uploading files to Google Cloud Storage (GCS).
• internal/jsonlbundle: implements logic to process a single JSONL bundle.
• `internal/schema implements logic to handle datatype and table schemas.
• internal/testhelper: implements logic to help in unit and integration (e2e) testing.
• internal/uploadbundle: implements logic to bundle multiple local JSON files into JSONL bundles and upload to Google Cloud Storage (GCS)
• internal/watchdir: watches a directory and sends notifications to its client when it notices a new file.

Files that do not have a .json suffix or are not in proper JSON format will be ignored. As mentioned earlier, jostler is different from pusher by not indiscriminately including all files in the bundle regardless of their content. This behavior of jostler will provide better security.

It is highly desirable that jostler guarantees it will not upload the same new format file more than once. With this guarantee there will be no need to deduplicate data. Due to asynchronous pod reboots and GCS failures, the feasibility of this guarantee is currently unclear but every effort will be made to obviate the need for data deduplication.

2.8. Concurrency and shared data

To be written.

2.9. Missed data files

For all planned reboots, upload agents on M-Lab nodes will have a duration to flush out their active data and wrap up gracefully so that no files are missed. For pusher, the duration is specified with the -sigtermWait flag and for jostler it will be specified with the -flushTimeout flag.

However, because pods can have unplanned restarts at any time, it is possible for jostler (or any other agent) to miss the Writable file was closed (IN_CLOSE_WRITE) or File was moved to (IN_MOVED_FROM) inotify events. Also if too many events occur at once, the inotify event queue can overflow and lose some events (see Limitations and caveats). Additionally, if upload to GCS fails, the individual new format files that were in the bundle will not be deleted.

When a file's last modification time is more than a configurable duration (e.g., 2 hours), jostler assumes it either missed the file's IN_CLOSE_WRITE or IN_MOVED_FROM event or uploading to GCS wasn't successful. In cases like this, jostler ***s the file eligible for upload. This also means that files that are open but are not modified for more than the configurable duration will be uploaded prematurely. This is why it is required that new measurements should not keep a file open without writing to it for more than a few minutes.