measurementlab/traceroute-caller Docker 镜像 - 轩辕镜像

traceroute-caller

![Version]([] ![Build Status]([] ![Coverage Status]([] ![GoDoc]([] ![Go Report Card]([***]

Local Development

Using docker-compose you can run a local instance of traceroute-caller that operates in concert with events from measurementlab/tcpinfo and using annotation from measurement-lab/uuid-annotator.

You must have a recent version of the Docker server configured and running in your local environment. As well, your local environment must include a recent version of docker-compose.

sh
$ docker-compose version
docker-compose version 1.27.4, build 40524192
docker-py version: 4.3.1
CPython version: 3.7.7
OpenSSL version: OpenSSL 1.1.1g  21 Apr 2020

In the root directory of traceroute-caller, start a local build using sample files in ./testdata.

sh
docker-compose up

This will create and run three containers. Container names are prefixed by the current working directory name (i.e., traceroute-caller). After the containers are running, trigger a network connection from within one of those containers. For example:

sh
docker exec -it traceroute-caller_traceroute-caller_1 apt-get update

The logs from traceroute-caller should indicate that files are being saved under ./local/*.

sh
ls -lR ./local

Use docker-compose down to stop the containers and remove resources before restarting your docker-compose environment.

sh
docker-compose down
docker-compose up

Traceroute Examiner Tool: trex

The trex command line tool in this repo can examine scamper MDA traceroutes that are in .jsonl format and do the following:

1. Extract single-path traceroutes from an MDA traceroute.
2. List traceroutes that took longer than a specified duration.
3. List complete and incomplete traceroutes.

Note:

• Not all traceroutes are complete. That is, not all traceroutes trace all the way to the destination IP address.
• Different hops associated with the same flow ID constitute a single path.
• The order of hops in a path is determined by the TTL.
• Unresponsive hops are marked as an asterisk ("*").
• It is possible for a hop to return multiple replies to a probe. Therefore, for the same flow ID and TTL, there may be zero, one, or more than one replies.
• When showing single-paths, only complete paths (if any) are printed.
• If you need to see all paths, use the "-v" flag to enable the verbose mode.

The easiest way to get started with trex is to first fetch an archive of M-Lab's MDA traceroutes to examine. This can be done as shown below:

sh
$ mkdir ~/traceroutes
$ cd ~/traceroutes
$ gsutil cp gs://archive-measurement-lab/ndt/scamper1/2021/10/01/20211001T003000.005106Z-scamper1-mlab1-lis02-ndt.tgz .
$ tar xzf 20211001T003000.005106Z-scamper1-mlab1-lis02-ndt.tgz

The above command extracts individual traceroute files to a directory called 2021. Now build the trex tool as shown below:

sh
$ git clone [***]
$ cd traceroute-caller/cmd/trex
$ go build

The above command builds trex and now you can use it to examine the traceroute files that you extracted. If trex examines more than one file, it prints statistics on how many files were found, how many were skipped because they were not .jsonl files, how many errors, etc.

sh
# Show usage message.
$ ./trex -h
Usage: ./trex [-cehv] [-d <seconds>] path [path...]
path  a pathname to a file or directory (if directory, all files are processed recursively)
-h    print usage message and exit
-c    print flow IDs and file names of traceroutes that completed ("--" for incomplete traceroutes)
-d    print times and file names of traceroutes that took more than the specified duration
-e    print examples how to use this tool and exit
-v    enable verbose mode (mostly for debugging)

# Show examples.
Examples:
# Extract and print a single-path traceroute (if it exists) from a traceroute file
$ trex /traceroutes/2022/04/01/20220401T001905Z_ndt-qqvlt_***_000000000009379D.jsonl

file: /traceroutes/2022/04/01/20220401T001905Z_ndt-qqvlt_***_000000000009379D.jsonl
src: 209.170.110.216
dst: 199.19.248.6
scamper start: ***
tracelb start: *** (0 seconds after scamper start)
scamper stop:  *** (1 seconds after scamper start)
flowid: 1
TTL    TX(ms)   RX(ms)    RTT(ms)  IP address
  1       N/A      N/A      0.000  209.170.110.193
  2       150      151      0.653  213.248.100.57
  3      1055     1062      7.244  199.19.248.6  <=== destination

The TX and RX columns are elapsed transmit and receive times since the tracelb
command was started.


# Same command as above but enable the verbose mode (useful for debugging).
$ trex -v /traceroutes/2022/04/01/20220401T001905Z_ndt-qqvlt_***_000000000009379D.jsonl

/traceroutes/2022/04/01/20220401T001905Z_ndt-qqvlt_***_000000000009379D.jsonl
Tracelb.Src: 209.170.110.216
Tracelb.Dst: 199.19.248.6
Tracelb.Nodes[0] 209.170.110.193
  Tracelb.Nodes[0].Links[0][0] 213.248.100.57
    Tracelb.Nodes[0].Links[0][0].Probes[0].Flowid: 1
    Tracelb.Nodes[0].Links[0][0].Probes[1].Flowid: 2
    Tracelb.Nodes[0].Links[0][0].Probes[2].Flowid: 3
    Tracelb.Nodes[0].Links[0][0].Probes[3].Flowid: 4
    Tracelb.Nodes[0].Links[0][0].Probes[4].Flowid: 5
    Tracelb.Nodes[0].Links[0][0].Probes[5].Flowid: 6
Tracelb.Nodes[1] 213.248.100.57
  Tracelb.Nodes[1].Links[0][0] 199.19.248.6
    Tracelb.Nodes[1].Links[0][0].Probes[0].Flowid: 1

file: /traceroutes/2022/04/01/20220401T001905Z_ndt-qqvlt_***_000000000009379D.jsonl
src: 209.170.110.216
dst: 199.19.248.6
scamper start: ***
tracelb start: *** (0 seconds after scamper start)
scamper stop:  *** (1 seconds after scamper start)
flowid: 1
TTL    TX(ms)   RX(ms)    RTT(ms)  IP address
  1       N/A      N/A      0.000  209.170.110.193
  2       150      151      0.653  213.248.100.57
  3      1055     1062      7.244  199.19.248.6  <=== destination

flowid: 2
TTL    TX(ms)   RX(ms)    RTT(ms)  IP address
  1       N/A      N/A      0.000  209.170.110.193
  2       301      302      0.644  213.248.100.57

flowid: 3
TTL    TX(ms)   RX(ms)    RTT(ms)  IP address
  1       N/A      N/A      0.000  209.170.110.193
  2       452      453      0.707  213.248.100.57

flowid: 4
TTL    TX(ms)   RX(ms)    RTT(ms)  IP address
  1       N/A      N/A      0.000  209.170.110.193
  2       603      604      0.608  213.248.100.57

flowid: 5
TTL    TX(ms)   RX(ms)    RTT(ms)  IP address
  1       N/A      N/A      0.000  209.170.110.193
  2       754      754      0.621  213.248.100.57

flowid: 6
TTL    TX(ms)   RX(ms)    RTT(ms)  IP address
  1       N/A      N/A      0.000  209.170.110.193
  2       904      905      0.673  213.248.100.57


# Print all traceroute files in a directory hierarchy that took longer than 5 minutes
$ trex -d 300 /traceroutes/2021
 428 /traceroutes/2021/10/01/20211001T000053Z_ndt-292jb_***_00000000000516D4.jsonl
 386 /traceroutes/2021/10/01/20211001T000151Z_ndt-292jb_***_000000000005160D.jsonl
...

files found:                          425
files skipped (not .jsonl):             0
files that could not be read:           0
files that could not be parsed:         0
files successfully parsed:            425
files with no traceroute data:          0

minimum duration:                       4 seconds
maximum duration:                     456 seconds
average duration:                     220 seconds


# Print flow ID of complete traceroutes ("--" if incomplete) in a directory hierarchy
$ ./trex -c /traceroutes/2021
 1 /traceroutes/2021/10/01/20211001T000014Z_ndt-292jb_***_00000000000516C8.jsonl
 1 /traceroutes/2021/10/01/20211001T000015Z_ndt-292jb_***_00000000000516C9.jsonl
-- /traceroutes/2021/10/01/20211001T000023Z_ndt-292jb_***_00000000000516C4.jsonl
...

files found:                          425
files skipped (not .jsonl):             0
files that could not be read:           0
files that could not be parsed:         0
files successfully parsed:            425
files with no traceroute data:          0
files with complete traceroutes:      149  (35%)